Dental

Viscosity:Gel Material:37% Phosphoric Acid Use For:Enamel/Dentin Packing:3x Syringe 3g CharmEtch is a phosphoric acid etchant. type of semi-gel. It helps to give astrong adhesion for layer of the broken surface of the tooth effectively. – Effective elimination of the smear layer – Providing...
Zinc Oxide Eugenol CementThis material is a non-irritating formulation for the temporary cementation of crowns and bridges. It is presented in the form of a powder and liquid. Strong adhesion and easy removal.
Type:Micro-Hybrid Tooth:Anterior + Posterior A resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil. Nanomers are discrete nanogglomerated particles of 7 nm...
Packing:  2x Automix Syringe 5ml + Mixing Tips Curing:  Dual-Cure Shade:  A3 Easy Application Dual Cured System (Light Curing 20 seconds) High compressive strength High flexural strength
0.0
SAR113.00
+
Nance Loop Forming Plier The four steps allow precision forming of 3-6mm loops. One beak is precision serrated to prevent wire slippage. Beveled edges prevent scoring of wire.13cm
Set Time:Normal Viscosity:Heavy Body Packing:2x Cartridge 50ml one-step (heavy body + light body) or two step (putty+light body)Application Range: - For impression taking of whole teeth/individual tooth/crown bridge, inlay, onlay, full mouth - For second impression stepWorking Time: 1 min 30...
2x Automix Syringe 10g + Mixing Tips Non-Eugenol Dental Temporary Cement Suitable Bond Strength to hold the Crown and Bridge Prevent Leakage of oral fluids and bacteria Formulated Completely Free of Eugenol Prevents Sensitivity to cold and heat , low in water solubilityPackaging Syringe Type :...
0.0
SAR125.00
7 ml (SAR125.00 per 7 ml)
+
A light curing, self etching, all in one adhesive. You perform etching, priming, bonding and desensitization in only one step.
0.0
SAR110.00
+
Polycarboxylate CementUsed primarily for final cementation of crowns and bridges. This luting cement has good biocompatibility, low film thickness of 13-18 microns and good insulating chracteristic. Material of choice for sensitive teeth and for preparations close to the pulp.
Type:Micro-Hybrid Tooth:Anterior + Posterior A resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil. Nanomers are discrete nanogglomerated particles of 7 nm...
Flavor:Orange Fluoride:5% Sodium Fluoride (22.600 ppm) Packing:10x Single Dose 0.5g Sodium Fluoride Varnish • Orange Flavor • Disposable package • Faster setting Time -Packaging • CharmVarnish - PK/10
An advanced formulation designed as a multi-purpose final cement for the cementation of crowns, bridges, inlays and onlays, as well as certain orthodontic applications. The cement chemically bonds to enamel, dentin and metal structures. Ideal for use as a liner under composite, amalgam or...
Product Characteristics Hand-mixing type of soft Putty (no stickiness) Use for precise impression Good viscosity and biocompativility Low shrinkage and no deformation Excellent detail reproduction of margin area Good dimesional stability High final-hardness and coming to final...
Flavor:Bubble Gum Material:20% Benzocaine Packing:Jar 28g
Packing:  2x Automix Syringe 5ml + Mixing Tips Curing:  Dual-Cure Shade:  Blue Easy Application Dual Cured System (Light Curing 20 seconds) High compressive strength High flexural strength
Fast setting of bite impression High solidity The lowest dimensional change Very accurate bite impressionAplication Range: - Impression of the occlusal surface - Check the occlusal surface - Intraoral incisal pin records after mounting of the occluderWorking Time: 20 secSetting Time in Mouth: 45...
This cement has a sedative effect on the pulp and is especially useful for cementation on prepared teeth with exposed dentinal tubules. The addition of polymers as reinforcing agents have transformed it into a final cement and intermediate restorative material with a compressive strength of 5400...
2 x 5g paste syringes,5ml primer bottle, 3ml etchant liquid bottle, accessories and IFU A unique composite resin system for bonding plastic, metal or porcelain orthodontics brackets to etched enamel. The highly filled paste features a tacky viscosity that flows well and eliminates bracket...
Porcelain Etch Gel10% hydrofluoric acid gel conditions porcelain or ceramic surfaces prior to bonding. Used prior to Prime-Dent® porcelain bond enhancer.
Type:Micro-Hybrid Tooth:Anterior + Posterior A resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil. Nanomers are discrete nanogglomerated particles of 7 nm...
Shade:White Curing:Dual-Cure Packing:2x Automix Syringe 5ml + Mixing Tips Easy Application Dual Cured System (Light Curing 20 seconds) High compressive strength High flexural strength
This single component material increases the bond strength of organic resins, such as composites and resin cements, to porcelain. Apply silane to the etched and dried porcelain surface. Conveniently dispenses one drop at a time from the syringe.
one-step (heavy body + light body) or two step (putty+light body)Application Range: - For impression taking of whole teeth/individual tooth/crown bridge, inlay, onlay, full mouth - For second impression stepWorking Time: 1 min 30 secSetting Time in Mouth: 4 min 30 secHardness: 47 (Shore...
Zinc Phosphate CementA very high strength permanent cement (131 Mpa compressive strength) representing perhaps the oldest and most well accustomed cement still in use. It also provides a good insulating layer against thermal shock.
It is specifically designed for bonding to all restorative, metal and ceramic surfaces. The kit provides unique materials for preparing, priming, opaquing and protecting surfaces, and for sealing, finishing and polishing the final repair or restoration. Repair kit includes four syringes:...
0.0
SAR25.00
+
A dual cure composite resin cement ideally suited for cementing metal molar bands. Chemically bonds to both tooth structure and metal band to create a strong anchor. The glass ionomer technology creates high tensile and compressive strength reducing washout and loose bands. The cement when...
Packing:  Bottle 5ml Curing:  Light-Cure Fluoride:  Yes Type:  Nano-Filled CharmSensy has the effect of sealing of the dentin tube and desensitize the smart of teeth due to cervical and tooth wear. By continuously release fluoride, prevent second caries and biocompatibility, low...
one-step (heavy body + light body) or two step (putty+light body)Application Range: - For impression taking of whole teeth/individual tooth/crown bridge, inlay, onlay, full mouth - For second impression stepWorking Time: 1 min 30 secSetting Time in Mouth: 4 min 30 secHardness: 65 (Shore...
Fluoride:No Curing:Light-Cure Packing:3x Syringe 1.5ml + Etchant Bis-GMA based filled sealant resin is formulated specifically for the sealing of small pits and fissures. The flowable sealants have excellent penetration into light adaptations with high bond strength to the enamel for high...
Type:Micro-Hybrid Tooth:Anterior + Posterior A resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil. Nanomers are discrete nanogglomerated particles of 7 nm...
Type:One-Step (7th Gen) Curing:Light-Cure A 5th generation, single component, multi-use adhesive, which is hydrophilic and suitable for use on moist dentin (wet bonding technique).The adhesive incorporates aspects of a primer and bonding resin in a single bottle designed to bond...
Fast setting of bite impression High solidity The lowest dimensional change Very accurate bite impressionAplication Range: - Impression of the occlusal surface - Check the occlusal surface - Intraoral incisal pin records after mounting of the occluderWorking Time: 20 secSetting Time in Mouth: 45...
Shade:A2 Curing:Self-Cure Packing:Cartridge 50ml + Mixing Tips Temporary resin for Bridges and Crowns. CharmTemp Crown is a temporary resin
Flavor:Strawberry Material:20% Benzocaine Packing:Jar 28g
Self-Etch, Self-Adhesive resin cement (Veneers)- White Shade, 1 x 9g syringes, 10each x mixing tips and oral tips. Dual cured dental resin cement for indirect restorations, posterior ceramics, metal restorations. It is designed to be easily mixed with dual syringe and mixing tips Contents:...
Type:Micro-Hybrid Tooth:Anterior + Posterior A resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil. Nanomers are discrete nanogglomerated particles of 7 nm...
Shade:A1 Curing:Self-Cure Packing:Cartridge 50ml + Mixing Tips  Temporary resin for Bridges and Crowns. CharmTemp Crown is a temporary resin
0.0
SAR36.00
+
Highly polishable, 67% filled, esthetic composite used for all types of cavity preparations. The composite has a nominal particle size of 0.7 micron. An ideal choice for both anterior and posterior applications and also as a pit and fissure sealant. Ideal for repairing small defects and...
0.0
SAR29.00
+
Flavor:Grape Material:20% Benzocaine Packing:Jar 28g
Show another 16 products
Product filters
Brand (1)
    Show all (74)
Price

SAR  –  SAR

  • SAR25
  • SAR350