BONDING AGENTS

2-step conventional adhesive: primer and bond in the same bottle Light-curing APS Technology: excellent performance at any moisture level of dentin Benefits Increased polymerization standard and decreased sensitivity to moisture: Benefits of the APS technology. Ideal for areas with...
Type:Two-Steps (5th Gen) - Total-Etch Curing:Light-Cure Packing:Bottle 6ml (Primer + Adhesive) Adhesive system for enamel and dentin 2-step conventional adhesive: primer and bond in the same bottle. Light-curing. • All classes of direct restorations with composites (classes I, II, III, IV...
Type:One-Step (7th Gen) - Total-Etch - Self-Etch - Selective-Etch Curing:Light-Cure Packing:Bottle 5ml Self-etching light-curing adhesive system for enamel and dentin. Universal Adhesive (use under different acid etching protocols and on different surfaces); Minimizes post-operative...
0.0
SAR35.00
(SAR40.25 inc tax)
+
Bond Brush Handle 12pcs
0.0
SAR75.00
5 ml (SAR0.00 per 0 ml)
+
BondPlus NT is 15% filled with 0.4 micron barium glass (also found in the Medicept Flash composite). This unique technology provides the highest level of protection against micro leakage, while sustaining high bond strengths to a variety of surfaces. The filler not only reinforces the hybrid...
0.0
SAR200.00
4 ml (SAR200.00 per 4 ml)
+
INDICATIONS Direct restorations of all cavity classes with all light-curing restoratives ADVANTAGES Stick-immediately effect' for easy application of the restorative One-component – one application Excellent adhesion Perfect physical properties Wet-bonding technique...
0.0
SAR35.00
(SAR40.25 inc tax)
+
فراشي بوند مقاس عادي 200 قطعة
0.0
SAR35.00
(SAR40.25 inc tax)
+
فراشي بوند مقاس ناعم
EsBond is 5th generation bonding agent that is designed to bond all classes of direct composite restorations to dentin, enamel, as well as composite, treated composite and set amalgam. Indications: All direct composite restorations Indirect restorative cementation: metal, porcelain & composite...
BrandSpident Country of OriginSouth Korea
0.0
SAR160.00
6 ml (SAR160.00 per 6 ml)
+
MerFill Bond SE contains phosphoric acid methacrylate esters and maleic acid-modified methacrylates which being placed in aqueous surroundings will provide the moderate etching the surfaces of dentin and enamel to  allow  for  the  chemical  and  micromechanical  bonding  of  a  restorative...
BrandF&A MEDICAL Country of OriginNORWAY
0.0
SAR133.00
6 ml (SAR133.00 per 6 ml)
+
Improved one-component adhesive providing excellent bonding to dentin, enamel, composites, ceramics, metals and amalgam stability, durability and versatility. MerFill Bond is an advanced one-component adhesive system that provides one of the highest levels of adhesion among one- component...
BrandF&A MEDICAL Country of OriginNORWAY
0.0
SAR150.00
5 ML (SAR0.00 per 0 ML)
+
Fusion Bond 7 is the 7th generation, multi-functional, light cured one component dentine/enamel bonding agent containing nano sized colloidal silica fillers. Fusion Bond 7 primes & bonds in one step. Indications: As direct / indirect restorations with light cured composites. Product Benefits:...
COATING MATERIAL FOR GLASS IONOMER LIGHT CURED 1 bottle EQUIA Coat 4 ml, disposable applicators (25)
BrandGC CORPORATION Country of OriginJAPAN
INDICATIONS For bonding dentin and enamel to polymer-based restorative materials, compomers, ceramic surfaces to improve retention of a restoration. ADVANTAGES Simple to use Good wetting properties One component Excellent adhesion Compatible with light-, self- and dual-cured...
Brandi-dental Country of OriginLithuania
0.0
SAR150.00
5 ml (SAR150.00 per 5 ml)
+
IPERBOND MAX is a one-component, self-etching, light-curing  universal adhesive f or reliable bonding in one step. Its formulation based on 4-META and 10-MDP acidic monomers, which act as powerful structural agents, allows a tenacious bond to both dentin and enamel. Its strengths:...
BrandITENA Country of OriginFrance
Light Cure One-Step, Dentin/Enamel Bonding Adhesive, 7ml
0.0
SAR168.00
5 ml (SAR168.00 per 5 ml)
+
Simplified ultra-efficient bonding system based on proven ethanol/water solvent technologyBond Plus SE• Total etch, less technique sensitive• Ideal for wet or dry bonding • Reduced post-operative sensitivity Filler Loaded • Reduced micro-leakage • Reduced film thickness  • Increased bond...
0.0
SAR160.00
2.5 ml (SAR160.00 per 2.5 ml)
+
Type:Two-Steps (5th Gen) Curing:Light-Cure Packing:1 x 2.5 ml Bottle Prime&Bond universal1 x Instructions for Use1 x Illustrated Technique Guide
BrandDentsply Sirona Country of OriginUSA
0.0
SAR225.00
4 ml (SAR225.00 per 4 ml)
+
Type:Two-Steps (5th Gen) Curing:Light-Cure Packing:1x 4ml Bottle Prime&Bond universal™ 1x Instructions for Use • 1x Illustrated Technique Guide   Versatility for use with all etching methods, all indications Reliable performance on over-wet and over-dried dentin Virtually no...
BrandDentsply Sirona Country of OriginUSA
Type:Two-Steps (5th Gen) Curing:Light-Cure Packing:• 1x 3.5ml Prime&Bond® one Etch&Rinse • 1x 50 Applicator Tips • 1x CliXdish™ • 1x Instructions for Use is a combined Etch&Rinse (Total-Etch), Self-Etch and Selective-Etch adhesive.It offers a simple adhesive application technique for both...
BrandDentsply Sirona Country of OriginUSA
0.0
SAR105.00
7 ml (SAR105.00 per 7 ml)
+
A light curing, self etching, all in one adhesive. You perform etching, priming, bonding and desensitization in only one step.
Prime-Dent, Self Etch Bonding Agent, 7ml Bottle
0.0
SAR95.00
+
ReliaBond Single Bonding Adhesive 5th Generation 5ml
0.0
SAR185.00
+
ReliaBond Xtra Light Cure Self Etch Bonding 7th Generation 6ml
0.0
SAR505.00
4.5 ml (SAR505.00 per 4.5 ml)
+
Type:Activator Curing:Self-Cure Packing:• 1x 4.5ml Self Cure Activator 1x Instructions for Use Self-Cure Activator (SCA) is for use with Prime&Bond XP, Prime&Bond NT, prime&bond one ETCH&RINSE or Spectrum bond in conjunction with a dual-cure or self-cure resin cement such as Calibra,...
BrandDentsply Sirona Country of OriginUSA
0.0
SAR266.00
+
bonding agent for ceramic and luting composites
BrandDMG Country of OriginGermany Size1 Bottle @ 3 ml Vitique Silane Adhesive 1 Bottle @ 3 ml Vitique Silane Activator 50 Brushes 1 Brush holder
Type:One-Step (7th Gen) Curing:Light-Cure A 5th generation, single component, multi-use adhesive, which is hydrophilic and suitable for use on moist dentin (wet bonding technique).The adhesive incorporates aspects of a primer and bonding resin in a single bottle designed to bond...
Product filters
Brand
    Show all (13)
Price

SAR  –  SAR

  • SAR35
  • SAR505
Bestsellers