F&A MerFill Bond
Light-cureing Single-Component Bonding Agent Bottle/6ml

Improved one-component adhesive providing excellent bonding to dentin, enamel, composites, ceramics, metals and amalgam stability, durability and versatility.

MerFill Bond is an advanced one-component adhesive system that provides one of the highest levels of adhesion among one- component adhesives. The adhesion strength of MerFill Bond to the etched dentin is 17-40 MPa after 24 hours (depends on the individual laboratory test).

INDICATIONS FOR USE:

• Adhesive system for composite restorations (including flowable composites).
• Adhesive varnish for “cavities for amalgam restorations”.
• Protective varnish for ultra-sensitive areas of teeth.

PRODUCT BENEFITS:

• Compatible with most photopolymer  restoration  materials  and cements.
• Includes components (Bis-GMA, HEMA, phosphates) that provide high adhesion strength: to enamel - 26.6 MPa, to dentin - 26.5 MPa (after 24 hours).
• Easy in use.
• Long shelf life without refrigeration.
• Economical in use.
• Excellent bio-compatibility, the material does not contain acetone or other compounds that irritate the pulp.

METHOD OF USING:

• After etching apply the adhesive with a brush in the same way as varnish for cavities is usually applied.
• Cover the etched area with one or two layers of MerFill Bond in series. A single layer may not be enough. Do not rinse. Do not allow contamination of the working area.
• Light cure for 10 seconds.
• Then fill the cavity with a light-cured composite material or cement.

INDICATIONS AND PRECAUTIONS:

• In case of restoration of the V class cavities (cervical defects) the adjacent edges of the enamel should be beveled and etched in the usual way.
• Before etching dentin and adjacent enamel should be pre- cleaned with a polishing paste (free of fluorine), washed and lightly dried with compressed air that does not contain oil impurities

TREATING OF HYPERSENSITIVE CERVICAL AREAS:

• Clean the cervical area of hypersensitive tooth with prophylaxis paste and rubber cup.
• Wash the paste out with water.
• Dry with air free of oil.
• Avoid overdrying of dentin.
• Apply MerFill Bond in the same way as for direct restorations.